اكتشف مكينة القهوة المصممة لتقديم أداء قوي وكفاءة عالية في مختلف الاستخدامات. 💪🔧 تتميز بمحرك قوي، وجودة تصنيع متينة، وتشغيل سلس يمنحك نتائج احترافية مع استهلاك فعّال للطاقة.
Thank you for reading this post, don't forget to subscribe!✅ محرك عالي القوة والأداء
🛠️ تصميم متين لتحمل الاستخدام المستمر
⚙️ تشغيل سهل وسريع
🔋 كفاءة عالية وعمر استخدام طويل
🏆 مناسبة للاستخدام المنزلي والمهني
Q&A
Q: Why does the extraction sometimes run very slowly or produce no coffee, while other times there is no crema?
A: Extraction is too slow: The coffee grind is too fine. Please adjust to a coarser grind. No crema: The coffee grind is too coarse. Please adjust to a finer grind.
Q: Why is there no response by pressing Clean button?
A: Hold 3 seconds to enter descaling mode.
Q: Why the temperature of coffee is a little low?
A: About the coffee temperature setting (default 92°C): The temperature refers to the brewing temperature of the coffee grounds inside the filter basket under a certain pressure (e.g., 9 bar). When the pressure is too low and the flow rate too fast, heat will dissipate, resulting in lower coffee temperature. Additionally, if the portafilter and cup are not preheated, they will absorb heat, further reducing the final temperature.
To increase the final coffee temperature:
1. Preheat the portafilter and cup before extraction.
2. Adjust the coffee temperature: Press the setting button once to enter temperature setting mode, then press the “+” or “-” button to adjust the temperature.
Q: Why is there no response by press Steam button?
A: [Steam Icon] is a status indicator. The steam knob should be turned on when it is lit.
Q: Why is there no response by pressing beverage buttons?
A: Preheat should be completed with screen showing currently set temperature and Steam light lit to begin coffee making process.
Q: Why does Steam light remain unlit after turning on the machine?
A: Turn off the steam lever.
Q: Why does Clean light keep flashing?
A: It’s the indication for descaling, please refer to the manual instruction to perform descaling process.